Furnace equipments products
Forehearths & Distributors
An energy efficient forehearth and distributor combustion system is essential for consistent quality production in the glass industry. Good control is essential, particularly in the case of special or coloured glasses (e.g. green, amber) where a stable redox condition in the forehearth superstructure is essential for good quality production.
The forehearth and distributor combustion system developed by Glass Service is the result of 22 years of experience supplying to the glass industry. The system used is the premix gas/air type and can be used with natural gas or LPG.
The combustion system satisfies the demands of todays glass industry:
Correct combustion ratio in the full range of flow (3 – 50 mbar manifold pressure)
Linear flow valve control characteristic
Stable ratio condition during burner pressure fluctuations
Stable ratio conditions after a burner nozzle change or cleaning
Easy and precise manual setting of the gas/ air ratio for each zone
Wide range of flows and sizes (from DN25 to DN100)
GADP Combustion System
The GADP combustion system is based on the constant ratio between the DP (differential pressure) at the air orifice plate and the gas regulation valve. The GADP is not influenced by burner pressure fluctuations or by dirty or blocked burner nozzles.
The GADP technology is recommended for use in medium and high burner flow applications. In the case of high flows, a butterfly air valve can also be used.
The manifold pressure available using GADP is from 6 to 50 mbar and Glass Service is able to supply burners system for both low and high pressure applications.
The mixer Venturi and zero governor has been the common standard in the glass industry for many years and is used in all glass types including tableware, containers and special glasses. That system is based on the constant gas/ air ratio at the burner. Glass Service has developed a new ZGT combustion system based on the traditional system but with a number of changes technically that improve the quality and performance of the combustion system. The Glass Service solution increase the system performance and the stability of the gas/air ratio.
Glass Service use a specially designed air valve that can be adjusted to give the required maximum flow using a manually adjusted curtain. The max air flow can be set zone by zone during installation to set the servomotor valve to the max value (100% opening). The full stroke of the servomotor and valve increases the loop control stability.
The zero governor pressure tapping upstream of the Venturi mixer increases the gas/air ratio range and reduces the risk of gas leakage should the zero governor be damaged. The pressure range using ZGT is from 3 to 50 mbar and Glass Service is able to supply both low and high pressure burner systems. Because of the stability across the full range and in particular at low pressure and low flow, this system is highly recommended for use in the container industry.
OMN Combustion System
Glass Service introduce a new concept of combustion system utilising the new OMN device. The system uses a new concept of combustion ratio control. It comprises an air orifice plate and a double stage zero governor. The pressure tapping for the zero governor is taken upstream of the orifice plate flange chamber. In this chamber there is an over pressure which causes a flow restriction.
The gas input is in the orifice plate chamber downstream of the orifice plate and is regulated by a high precision gas needle valve. The size of orifice plate and needle valve are designed specifically for each combustion zone. Another new innovation is the use of a double stage zero governor. This increases the ratio stability in the full range and in real time.
The pressure range available using OMN is from 3 to 50 mbar and Glass Service is able to supply low and high pressure burner systems.
Because of the stability across the full range and in particular at low pressure and low flow, this system is highly recommended for use in the container industry.
The OMN system ensures the best performance of gas/air ratio stability over the full range of flows without the need for adjustment over time.
The forehearth & distributor combustion skid deigned by Glass Service are compact and easy to install. The combustion system is preassembled on the skid ready for installation, complete with all up to date equipment necessary for the best performance. For each zone the required technology is installed (ZGT; GADP; OMN). Other equipment are also installed for best performance.
Burners & Manifold
Glass Service developed the foreheart and distributor burner technology along with the necessary manifolds and mountings for the forehearth casing. The burners are totally sealed to the refractories. The burner nozzle are available in several sizes as standard production, with different nozzle diameter available on request.
1/4 inches / 6,3 mm
3/8 inches / 9,5 mm
9/32 inches / 7,1 mm
5/16 inches / 7,9 mm
The burners are manufactured in special high temperature resistant steel. The burners are supplied complete with manifolds and he brackets that allow 3 directional
movement for better installation and adjustment after heat-up. Each manifold is supplied with long flexible connection and manual shut off valve for burner maintenance.